Elemental composition, corrosion resistance and mechanical properties of computer-aided design and computer-aided manufacturing fixed retainers versus conventional fixed retainers.

PURPOSE: To investigate the elemental composition, corrosion resistance, and mechanical properties of computer-aided design and computer-aided manufacturing (CAD-CAM) retainers versus conventional fixed retainers (FRs). METHODS: Eight different retainer wires were investigated. Energy dispersive X-ray spectroscopy was used to determine the elemental composition. Leakage was analysed according to ISO 10271:2020 guidelines. Hardness was tested using the Vickers method with a load of 0.3 kg. The tensile force and tensile strength were evaluated. Multiple comparisons among wires of hardness, tensile force, and strength were conducted using the Welch t-test, with Bonferroni correction. RESULTS: Nickel was present in all wires. The CAD-CAM-FR wire, which contained more nickel than the other wires, had no measurable leakage. The gold-plated wires had the highest total leakage, but did not exceed the ISO standard limit. The hardness of the stainless-steel twisted wires was the highest and that of the CAD-CAM-FR wire was the lowest. The tensile strength of the CAD-CAM-FR wire was significantly lower than that of the other wires and similar to the other twisted-wire retainers. CONCLUSION: The CAD-CAM-FR wire is likely to have high corrosion resistance and flexibility due to its low hardness.

Deterioration of direct restorative materials under erosive conditions with impact of abrasion and attrition in vitro.

Objective: To compare the cumulative impact of sequential wear on mechanical properties and appearance of a composite resin (CR), Filtek Z250®, a glass ionomer GI, Fuji IX GP®, and a glass hybrid (GH), Equia Forte®. Material and Methods: Six equally sized specimens of each material were subjected to wear tests, i.e., simulation of brushing, chewing and acidic liquid exposure, mimicking at least 6 months of clinical exposure. Surface roughness, hardness, substance loss and degree of shade lightness were determined. Results: Following wear tests, significant increase in surface roughness and decrease in hardness values were observed for all materials (p < .05). Significantly larger substance loss was found in Equia Forte® specimens compared to Filtek Z250® (p < .05), while that of Fuji IX® exceeded the measurement capacity of the instrument. Opposite to the two other materials, the shade of Filtek Z250® became darker. Conclusions: Sequential wear exposure mimicking abrasion, erosion and attrition to products representing CR, GI and GH, caused weakening and change in appearance of the materials. The composite resin was the most mechanically resistant to the sequential wear.

Association of Locus Xq26.1-27.3 with Erosive Tooth Wear Phenotypes in a Group of Adolescents.

Erosive tooth wear is a multifactorial condition of an increasing prevalence. There is a need for discovering individual genetic predisposition for the development of this condition. Considering that the chromosome X locus was previously shown to be associated with dental caries, the aim of the present study was to look for the association between this locus and erosive tooth wear when dietary habits are considered as a co-factor. Saliva samples, erosive wear experience data, and dietary information from 16- to 18-year-old dental patients (n = 705) were used. Genotyping analyses were performed, and thereafter, analyses considering diet and oral hygiene data, using logistic regression, with the assumption that erosive tooth wear is a complex gene-environment model. Genotypic analyses revealed an association between chromosome X marker rs1324156 and erosive tooth wear phenotype. Logistic regression analysis showed that, in the presence of less common allele of rs12687601 and rs1324156, erosive tooth wear more likely develops when associated with numerous dietary variables from the questionnaire. These results indicate that erosive tooth wear may be the result of gene-environment interactions.

Therapeutic Strategies for Dry Mouth Management with Emphasis on Electrostimulation as a Treatment Option.

OBJECTIVES: Xerostomia is a subjective sensation of dry mouth. It is commonly associated with salivary gland hypofunction. Both changes in the composition of the saliva and a reduction in the quantity secreted may be an objective finding of dry mouth. Although there are no currently available cures for the conditions resulting in dry mouth, there are several treatment options that give hope for patients who suffer from xerostomia. Individuals with some residual salivary gland function, which are contraindicated to pharmacological therapies, would benefit the most from identifying novel, alternative effective methods for stimulating production of saliva. The aim of this study was to give an overview of the latest and most relevant data related to treatment modalities for the management of dry mouth conditions. Data Resources and Study Selection. The present review was prepared by searching the National Library of Medicine database using the relevant medical terms and their combinations. A total of thirty-three studies met the inclusion criteria. Data were extracted by one author and verified by another. CONCLUSION: A number of patients showed positive treatment outcomes, and the adverse effects of both electrical stimulation (ES) and acupuncture have been reported as mild and transient. In patients who have undergone radiotherapy, acupuncture is shown to increase salivation. However, in patients with Sjogren's syndrome, the effects of ES devices seem to be elusive. Moreover, due to the instability of the findings in relation to longevity of clinical effect, patient satisfaction, quality of life, and clinical effectiveness of such treatments, the results remain vague.

Genetic Aspects of Dental Erosive Wear and Dental Caries.

OBJECTIVES: The present review aims to give an overview of the literature focusing on novel genetic aspects of dental erosion and dental caries. Once the tooth erupts into the oral cavity, the regenerative capability of enamel is fundamentally limited due to the loss of dental epithelium during eruption. The susceptibility or resistance to dental erosion and caries is presumably a result of environmental, phenotypic, and/or genetic influence. Even though it is evident that individuals frequently exposing their teeth to acid and sugar are at high risk of developing dental erosion and caries, the findings exclusively based on these factors are elusive. Data resources and study selection. The present review was based on data collected from the National Library of Medicine database with different combinations of the following terms: "tooth," "dental," "dentin," "enamel," "erosion," "erosive wear," "caries," "decay," "gene," and "genetic." A total of forty-six studies met the inclusion criteria. Data were extracted by one reviewer and verified by another. CONCLUSION: The high prevalence of erosion and caries among certain groups, and observations that not all individuals appearing to be at risk develop these lesions, has sparked research on identifying genetic effects to these conditions. A connection of genome-wide and candidate gene studies has increased considerably in the literature. This review reveals largely varying success among studies, demonstrating the difficulties of developing the study with adequate sample sizes and durable phenotype definitions that permit enough statistical power to identify genetic contributors.

Survival of primary molars with pulpotomy interventions: public oral health practice-based study in Helsinki.

OBJECTIVES: To assess long-term survival of pulpotomized primary molars and factors related to the survival of the teeth. MATERIALS AND METHODS: This retrospective longitudinal study was based on electronic dental health records of children who attended public health service. Eligible children were <12 years and had a pulpotomy procedure code in their dental treatment history. Data were obtained in the period between 2002 and 2016. Chi-squared test, t-test, and one-way ANOVA were used to assess for statistical differences. Kaplan-Meier analyses were performed to create survival estimates, and the log-rank test was performed to compare differences in survival distributions. A multivariate Cox regression was conducted, and hazard ratios were calculated to estimate the hazard rate for failure. RESULTS: Of interventions, 40% were registered in children 3-6 years of age; 56% were boys. Mean estimated survival of such molars was 82 months (SEM = 0.6) and differed by dental operator's work setting and choice of restorative materials used after pulpotomy intervention. Using a stainless steel crown (SSC) to restore pulp-intervened primary molars had the strongest effect on survival (111 months with SEM = 1.8), followed by if the intervention was performed by a specialist or specializing dentist in paediatric dentistry (99 months with SEM = 2.6). CONCLUSIONS: The estimated survival time of pulpotomized primary molars is affected by dental operator-related factors, which should be considered in management of extensively carious primary molars of paediatric patients, both at the clinical and organizational decision-making levels. An increased focus on the use of SSC is recommended to be in the learning objectives of dental education programs.

Knowledge on and treatment practices of erosive tooth wear among Finnish dentists.

OBJECTIVES: To investigate Finnish dentists' knowledge on and means of recording, detecting and diagnosing erosive tooth wear (ETW). Treatment options and possible differences in treatment decisions between general and specialized dentists were also evaluated. MATERIALS AND METHODS: An electronic questionnaire was sent by e-mail to 3664 Finnish dentists. Respondents' gender, age, work experience, field of specialty, and practice location were requested. The questionnaire also included a patient case where the dentists were asked about their choice of treatment. Statistical analyses were performed using means, proportions, and cross tabulations. RESULTS: Response rate was 24% (n = 866). Almost all respondents (98.0%) recorded ETW in patient files, but only 4.1% used a detailed scoring system. Of the respondents, 64.4% usually found the cause of ETW. Use of carbonated beverages (84.3%), energy drinks (57.0%), and reflux disease (53.1%) were reported to be probable causes. The majority of the respondents (80.9%) usually assessed patient's dietary history while 1.9% evaluated saliva secretion rate. When asked about treatment decisions of ETW patients, the differences between general dentists and specialized dentists were not as obvious as hypothesized. CONCLUSIONS: This study suggests that the Finnish dentists who participated in this survey are able to detect and/or diagnose erosive tooth wear, but there is variation in recording it. The differences in treatment decisions between general dentists and specialized dentists seem to be moderate. The treatment practices for ETW are not established and further research to create clinical guidelines seems to be needed.

Awareness, knowledge and treatment decisions for erosive tooth wear: A case-based questionnaire among Danish dentists.

OBJECTIVE: To examine the knowledge and experience of erosive tooth wear (ETW) among Danish dental practitioners and, based on two cases, explore their treatment decisions. METHODS: We sent a validated questionnaire electronically to all active members of The Danish Dental Association and The Association of Public Health Dentists in Denmark. The questionnaire had two parts; the first focused on scoring, recordkeeping, knowledge and experience of ETW. The second part presented two patients with different severity of erosive lesions to explore the dentists preventive and restorative treatment decisions. RESULTS: We received 442 answers from 4,490 potentially eligible dentists in Denmark (response rate 9.8%). The majority (78%) was female and the median age was 44 years. Nearly all respondents (97%) registered ETW in the charts and 49% recorded "always" or "often" the patients' diet history, most commonly with aid of interviews. The respondents perceived the prevalence of ETW to be higher today than 10-15 years ago and male patients (15-25 years) appeared more affected than females. The majority (82%) thought that they usually found the probable cause of the condition with carbonated beverages being the most common factor. The treatment included dietary guidance, soft tooth brushing with non-abrasive fluoride toothpaste, topical fluoride applications and direct composite restorations. CONCLUSION: The majority of Danish dentists taking part of this survey had adopted a minimally invasive approach for the management of erosive tooth wear in young adults. There was however room for improvements in diagnosis, scoring and case documentation.

In vitro abrasivity and chemical properties of charcoal-containing dentifrices.

OBJECTIVE: Charcoal-containing dentifrices are gaining popularity, but scientific information on their effect on oral health is scarce. This study investigated properties of dentifrices that may affect dentine abrasivity, as well as their ability to adsorb fluoride, their pH and the presence of harmful substances. MATERIALS AND METHODS: The dentifrices NAO and COCO were subjected to the following analyses: abrasivity, expressed as mean abraded depth and relative dentin abrasivity (RDA), and surface roughness of extracted human molars (n = 30) after simulated brushing; fluoride adsorption measured as concentration change; pH measurements; detection of polycyclic aromatic hydrocarbons by gas chromatography-mass spectrometry. The products were compared to a reference dentifrice (Colgate® MaxWhite), positive controls (ISO dentifrice slurry, activated charcoal for laboratory use) and a negative control (distilled water). RESULTS: The mean abraded depths of NAO and COCO were not different (p > .05), but higher than the reference dentifrice and the negative control (p < .05). The RDA values of NAO, COCO and the ISO dentifrice slurry were higher than the reference dentifrice value (p < .05) by up to 10 times. The dentine surface roughness was higher after brushing with NAO, COCO and ISO dentifrice slurry compared to distilled water (p < .05). No change in mean adsorbed fluoride concentration was observed after 24 h (p > .05). Both NAO and COCO were alkaline (pH > 7). Analysis of NAO revealed the presence of naphthalene (112.8 ± 2.0 ng/mL). CONCLUSION: The charcoal-containing dentifrices were abrasive within acceptable limits set by ISO and did not adsorb fluoride. The presence of naphthalene in one product is a cause for concern.

Functional, compositional, and regulatory analyses of imported and non-imported single dental crowns.

The aims of the study were to investigate functional and esthetic properties, the composition of the alloy, and the content of hazardous elements of single dental crowns with metal skeleton and fired porcelain. Epoxy models made from full mouth impressions taken of a patient with a crown preparation of the right maxillary first permanent molar were used for production of identical polyether impressions, which were distributed to dentists in Norway. The dentists sent the impressions to their regular dental laboratories. All 55 crowns collected were anonymized and examined. Of the crowns received, 35 were made in Norway, 12 were imported, and 8 were of unknown origin. The evaluation of functional properties revealed that 50% of the Norwegian, 42% of the imported, and 25% of the unknown-origin crowns were considered unacceptable. The composition of the alloy was not in accordance with that stated by the manufacturer for 17%, 13% and 20% of the crowns, where this information was provided. The lead content of the alloy exceeded the limit set by the ISO 22674: 2016 for 18% of the crowns in total. The statement that shall follow the work according to EU-regulations was not complete for approximately 75% of the works received.

Estimating molar-incisor-hypomineralization among 8-year-olds based on 15-year public oral health practice-based data.

Background: A wide range in the prevalence of molar-incisor-hypomineralization (MIH) has been reported. Population-based studies are recommended. However, such studies are expensive and time-consuming.Objectives: To estimate the magnitude of MIH condition among 8-year-olds based on routine oral health examinations and to associate first permanent molar (FPM) affection with that of other permanent teeth over time.Materials and methods: This retrospective study, with cross-sectional and longitudinal components, was based on electronic oral health records; all 8-year-olds examined between 2002 and 2016 were included.Results: The average estimated prevalence of MIH was 8.3%; yearly range was 4.8-15.9%. The mean number of affected teeth was 1.4; 62% had one affected tooth. One-surface defects were the most frequent (66%). Asymmetric distribution of affected teeth was observed. In follow-up, 10.7%, 8.4%, and 11.2% had at least one affected permanent canine, premolar, or second permanent molar, respectively. The proportion of children with other MIH-affected permanent teeth was higher in the group with ≥2 MIH-affected teeth than in group with one affected FPM at the age of 8.Conclusions: The average prevalence of MIH was comparable to that reported elsewhere. The number of MIH-affected teeth at early mixed dentition predicts the affection of other permanent teeth over time, mainly that of permanent canines. Further screening of children with MIH is recommended to improve individually tailored early preventive and restorative dental care.

Dental erosion in mice with impaired salivary gland function.

Objective: Salivary flow rate exerts an essential impact on the development and progression of dental erosion. In this work, the experimental dental erosion in non-obese diabetic (NOD) mice with reduced salivary flow rate was induced, and the erosive effect of acidic drinks on their dentition was studied.Material and methods: Three acidic drinks (sports drink, cola light drink and sugar containing cola drink) were given to adult NOD mice (groups: N = 11) as the only drink for 6 weeks. Two control groups were included; wild type and NOD control (groups: N = 9). Experimental and control (water) teeth were dissected out and observed by scanning electron microscopy (SEM). Mandibular first molars were subsequently embedded in Epon, ground transversely, observed again by SEM, and the enamel thickness and tooth height were measured.Results: Mandibular molars were considerably more eroded than maxillary molars. The erosive process started at the top of the cusps and subsequently extended in the cervical, mesio-distal, and pulpal direction. Erosive lesions were evident in increased succession from sports drink, cola light to cola drink exposed mandibular molars, with the lingual tooth height being approximately 23%, 26%, and 37% lower, respectively, compared to the control. The lingual enamel was approximately 48% thinner in sports drink molars and 62% thinner in cola light molars. In cola drink molars, the lingual enamel was totally eroded, and significant erosion of dentine was evident.Conclusion: Reduced salivary flow, together with a high consumption of acidic drinks, results in severe erosion of NOD mice molars.

Aquaporins' Influence on Different Dental Erosive Wear Phenotypes in Humans.

Dental erosive wear is a multifactorial condition of high prevalence. Nowadays, there is an emphasis on discovering individual genetic predisposition for the development of this condition. Aquaporins (AQPs) are water channel proteins expressed in salivary glands, as well as during tooth development. They are involved in salivary secretion and composition and linked to physiological protection of the oral cavity. The aim of this study was to explore the relationship between different dental erosive wear phenotypes, AQP genes, and selected environmental factors. Data from 705 dental patients were used to investigate the association between dental erosive wear phenotypes and AQPs' single-nucleotide variants. Phenotypes were further analyzed considering diet and oral hygiene data, using logistic regression analysis, as implemented in PLINK, with the assumption that dental erosive wear is a complex gene-environment model. Associations were found between severe erosive tooth wear and rs2878771 (AQP2) for the genotypic (p = 0.02) and dominant (p = 0.03) models, and rs3736309 (AQP5) for the allelic model (p = 0.02). Logistic regression analyses, after implementing the Bonferroni correction, showed that several significant associations were present when covariates were included, suggesting that a strong environmental component is present. Our results show that dental erosive wear establishes under a gene-environmental complex model.

The frequency of enamel and dentin caries lesions among elderly Norwegians.

Aim: To describe the distribution of enamel-, dentin-, root- and secondary caries within an elderly population in Northern-Norway.Material and methods: A study population (n = 1 173) was divided into age groups: 65-69 (seniors), 70-74 (young elderly), 75-79 (elderly) and 80-94 (old elderly). Seven examiners registered presence, location and severity of caries lesions on x-rays and intra-oral photos. Severity of approximal, occlusal, secondary and root caries was graded (D1-2: into enamel; D3-5: into dentin, root caries), and decayed missing filled surfaces/teeth (DMFS/DMFT) were calculated. T-test, ANOVA and a Bonferroni correction were used.Results: The seniors had more primary caries (DS1-5) compared to the oldest age groups, while the old elderly had significantly more secondary caries than the other groups (p < .05). Of those ≥65 years 13.8% were affected with root caries, 21% among the oldest. About 48% of the old elderly had one or more surfaces with untreated caries lesions into dentin, while for the other groups the number was 35% (p < 0.05).Conclusion: Individuals seem to maintain good oral health up to at least 80 years of age. Those older than 80 years have more root caries needing more intensified caries-controlling measures and a higher prevalence of untreated dentin lesions often in need of operative treatment.

Protein Profiles of Individuals with Erosive Tooth Wear

Abstract Objective: To determine if protein profiles identified in saliva could be used to determine risk and severity of erosive tooth wear. Material and Methods: Three types of saliva sampling were performed to obtain saliva from 34 18-year old individuals that received regular dental check-ups, along with clinical status of the dentition and risk factor related to erosive tooth wear using the VEDE scale. Protein profiles in saliva were determined using electrophoresis and the calculation of the percentage of a specific band at a specific molecular weight in relationship to the total protein in that sample (% of total) using molecular weight standards. This quantification was repeated for each protein band across a range of molecular weights for each sample to test for association with erosive tooth wear status. Results: There were no differences in the number of detectable proteins sourced from the parotid gland, nor the unstimulated and stimulated whole saliva. Five out of the 34 individuals had no signs of erosive tooth wear despite an acidic diet and were more likely to have proteins with molecular weight smaller than 1 KDa (p=0.03). Conclusion: There is potential for the use of protein profiling to determine risks for erosive tooth wear.

Opinions and Treatment Decisions for Dental Erosive Wear: A Questionnaire Survey among Icelandic Dentists.

Dental erosive wear (DEW) is common among children and adolescents, and a survey of Icelandic children showed that 30.7% of 15-year-olds were diagnosed with the condition. Objective. To gain knowledge about dental practitioners' experiences, opinions, and treatment decisions. Materials and Methods. A precoded questionnaire, previously used among Norwegian dentists, was sent electronically to all dentists in Iceland (n = 341). Results. The response rate was 64.2%, and 58% of dentists were male. More than half of the clinicians (54%) thought that prevalence had increased the last 10-15 years, and 67% reported it to be more common in male. Most (96%) recorded presence of DEW, but only 4% used a detailed scoring system. Lesions were mostly on occlusal surfaces of first mandibular molars (73%), on palatal in upper anterior teeth (61%), and on occlusal of maxillary first molars (36%). Most dentists (74%) reported a probable cause, e.g., high consumption of carbonated beverages (98%), acidic juices (68%), sport drinks (58%), reflux (54%), and eating disorders (20%). Dietary history was often recorded by 38%, and 65% never measured saliva. Most of the dentists (88%) treated patients themselves, and half of them preferred prevention with high fluoride and resin sealants. While some dentists wanted to restore teeth more invasively, most considered to restore with a filling. Conclusion. Icelandic dentists seem to be well educated for diagnosis and treatment of dental erosion, and dentists are aware of a minimally invasive approach. Clinical Significance. It is challenging for dentists to make the best treatment decision for patients with DEW, both in a short perspective and long perspective. At present, little is known about their knowledge and treatment approach, and there is no standard treatment which can be recommended. Therefore, the present study investigated dental practitioners' treatment decisions, as well as knowledge, experiences, and awareness of DEW.

New animal model of extrinsic dental erosion-Erosive effect on the mouse molar teeth.

OBJECTIVE: Consumption of acidic food and drinks is considered as important risk factor for development of dental erosion. There are several in vitro and in situ studies focusing on the risk indicators and preventive treatment, however, the need for a standardized animal model has been emphasised for many years. The aim was to establish an animal model of extrinsic dental erosion, which may serve as a standard for future studies to improve our understanding of the erosion. DESIGN: Two acidic drinks, sports drink and cola drink, were given to young mice for six weeks. Experimental and control (water) molars and incisors were dissected out and observed by scanning electron microscopy (SEM). Mandibular first molars were subsequently ground transversely and observed again by SEM. The tooth height and enamel thickness were measured on the SEM images. RESULTS: The lingual surface of the mandibular molars was most eroded after consumption of acidic drinks. The cola drink exhibited higher erosive effect on mandibular molars compared to sports drink. The lingual tooth height, compared to control, was about 34% and 18% lower in the cola drink and sports drink molars, respectively. Compared to the control molars, the lingual enamel was about 23% thinner in the sports drink molars and totally eroded on the certain lingual areas of the cola drink molars. CONCLUSIONS: This new animal model of extrinsic dental erosion and the presented method with ground molars observed in SEM are suitable for further studies, which will gain deeper insights into the erosive disease.

Redefining the Phenotype of Dental Caries.

Dental caries is a multifactorial infectious disease and a major public health problem estimated to affect 60-90% of school children as well as a vast number of adults. The aim of this work was to define patterns of progression of the disease based on longitudinal data in contrast to using a cross-sectional assessment. dmft/DMFT scores were collected at ages 5, 12, 14, 16, 17, and 18 from 876 individuals. We tested our newly defined phenotypes for association with genetic variants in genes shown to be associated with caries. We generated genotyping data using Taqman chemistry in markers of genes involved in processes such as enamel formation and salivary contributions. Kallikrein 4 (KLK4) was found to show a significant association with the created phenotypes (p = 0.0008 in a recessive model for low caries experience in the primary dentition vs. high caries experience in the primary dentition, and p = 0.0004 in a recessive model for caries free primary dentition vs. high caries experience in the primary dentition).

Survival of extensive restorations in primary molars: 15-year practice-based study.

BACKGROUND: Caries decline in the western world is accompanied by strong polarization among children; 8% of Finnish 5-year-olds having 76% of untreated caries. This high caries risk group needs preventive and restorative strategies. AIM: To explore survival of extensive restorations in primary molars. DESIGN: This study was based on health records from 2002 to 2016 of children under 18 years. RESULTS: Of severely affected primary molars (n = 1061), 41% were restored with preformed metal crowns (PMCs), 38% with glass-ionomer cement (GIC)/polyacid-modified resin composite (PAMRC)/resin-modified GIC (RMGIC), and 21% with resin composites (RC). Younger children (3-8) received 97% of the PMCs and 86% of GIC/PAMRC/RMGIC; older ones (≥9) 91% of the RC restorations. Neither amalgam nor indirect restorations were registered. General dentists (GDs) engaged in primary care restored with GIC/PAMRC/RMGIC (52%) or RC (48%). GDs in general anesthesia care service placed 66% and specializing/specialized dentists 31% of PMCs. PMCs had lower failure rate (1.4% vs 3.0%) than GIC/PAMRC/RMGIC (P = 0.001). Choosing PMCs reduced patient visits compared to other restorations (P < 0.001). CONCLUSIONS: Severely affected primary molars of children at high caries risk are better managed, using PMCs to optimize the resources in public oral health services.

Genetic variation may explain why females are less susceptible to dental erosion.

Not all individuals at risk for dental erosion (DE) display erosive lesions. The prevalence of DE is higher among male subjects. The occurrence of DE may depend on more than just acidic challenge, with genetics possibly playing a role. The aim of this study was to investigate the association of enamel-formation genes with DE. One premolar and a saliva sample were collected from 90 individuals. Prepared teeth were immersed in 0.01 M HCl (pH 2.2), and enamel loss (µm) was measured using white light interferometry. DNA was extracted from saliva, and 15 single-nucleotide polymorphisms were analysed. Allele and genotype frequencies were related to the enamel loss of the specimens. Single-marker and haplotype analyses were performed using sex as a covariate. Mean enamel loss was higher for male donors than for female donors (P = 0.047). Significant associations were found between enamel loss and amelogenin, X-linked (AMELX), tuftelin 1 (TUFT1), and tuftelin-interacting protein 11 (TFIP11). Analyses showed significant associations between variation in enamel-formation genes and a lower susceptibility to DE in female subjects. The results indicate that susceptibility to DE is influenced by genetic variation, and may, in part, explain why some individuals are more susceptible than others to DE, including differences between female subjects and male subjects.